Kexcelled THE K5™ PETG V2 - 1kg 3D Printing Filament (+/-0.03mm) - Gray

V2: Improvement of PETG K5 with cardboard spool

Upgraded Filament: Kexcelled PETG filament improves nozzle sticking problem and improves notch impact resistance for better printability

Chemical Resistance: PETG exhibits excellent chemical resistance, withstanding immersion in over 10 different solutions, including motor oil, perfume, detergent, and toothpaste

Heat Resistance: With an HDT temperature rating 5-10°C higher than PLA, PETG offers a distinct advantage in applications requiring both chemical and heat resistance

Wear-resistant and Toughness: PETG filament provides high wear resistance and impact strength, making it ideal for manufacturing durable parts and prints

Note: Dry the filament before use for optimal printing results. Store the filament in a dry environment, avoiding high temperatures or humid conditions

Compatible printer: Compatible with 99% of all printers on the market, including Bambu Lab. Printing temperature: 225 – 245 °C, bed temperature: 70 – 80 °C, printing speed: 40 – 80 mm/s

High consistency: Optimized extrusion process and double defect detection technology ensure 1.75 mm filament diameter with controlled +/- 0.03 mm tolerances.

Suggested Printing Parameters *

Nozzle temperature     230 ~ 260℃

Bed temperature         70 ~ 80℃

Bed modification             PEI frosted board

Active cooling fan             ON, 0 ~ 50%

Layer height                     0.2mm

Shell thickness             ≥ 0.8mm

Print speed                     ≤ 200mm/s

* Settings are based on a 0.4mm nozzle.

Technical Data Sheet (TDS)

Material Properties                                Typical Value            Test Method

Glass transition temperature             ~70℃                     ISO 11357

Melt flow rate (MFR)¹                             6~16g/10min     ISO 1133

Heat deflection temperature (HDT)²     74℃                 ISO 75

Vicat softening temperature (VST)³         80℃                 ISO 306

Density                                                     1.4~1.44g/cm³         ISO 1183

Odor                                                         Low             /

Solubility                                             Insoluble in water     /

1. Test conditions: T= 230℃; m= 2.16kg.

2. Test conditions: 0.45MPa; 120℃/h.

3. Test conditions: 10N; 120℃/h.